Extreme Networks WM20 Controller Guia do Utilizador

Extreme Networks, Inc.3585 Monroe StreetSanta Clara, California 95051(888) 257-3000(408) 579-2800http://www.extremenetworks.comSummit WM20 User GuideS

About this GuideSummit WM20 User Guide, Software Release 4.210● “Glossary” contains a list of terms and definitions for the Summit WM Controller and t

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2100A client that exceeds either the pre-timeout or post-timeout val

Topology for a WM-ADSummit WM20 User Guide, Software Release 4.2 101A third-party AP WM-AD allows for the specification of a segregated subnet by whic

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2102To define a next hop route and OSPF advertisement:1 From the mai

Topology for a WM-ADSummit WM20 User Guide, Software Release 4.2 103DHCP enabled (by default, DHCP is disabled). These values are not visible for a br

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2104To modify time limits for IP assignments:1 From the main menu, c

Topology for a WM-ADSummit WM20 User Guide, Software Release 4.2 105To use an external DHCP server for the WM-AD:1 From the main menu, click WM-AD Con

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.21063 From the Assignment by drop-down list, select AAA.4 Configure

Assigning Wireless AP Radios to a WM-ADSummit WM20 User Guide, Software Release 4.2 107To assign Wireless APs to a WM-AD:1 From the main menu, click W

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2108Authentication for a WM-ADThe next step in configuring a WM-AD i

Authentication for a WM-ADSummit WM20 User Guide, Software Release 4.2 109The first five of these VSAs provide information on the identity of the spec

Safety InformationSummit WM20 User Guide, Software Release 4.2 11Safety InformationWARNING!Read the following safety information thoroughly before ins

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2110● Auth – Use to define authentication servers.● MAC – Use to def

Authentication for a WM-ADSummit WM20 User Guide, Software Release 4.2 1115 From the RADIUS drop-down list, select the server you want to use for Capt

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.211211 In the Include VSA Attributes section, click the appropriate

Authentication for a WM-ADSummit WM20 User Guide, Software Release 4.2 1135 In the server list, select the RADIUS server and click Up or Down to arran

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2114To configure the Captive Portal settings for internal Captive Po

Authentication for a WM-ADSummit WM20 User Guide, Software Release 4.2 11511 In the Replace Gateway IP with FQDN box, type the appropriate name if a F

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2116If there is an authentication server configured for this WM-AD,

Authentication for a WM-ADSummit WM20 User Guide, Software Release 4.2 1174 Click Auth. The Authentication fields are displayed.5 From the RADIUS drop

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2118The selected server is no longer available in the RADIUS drop-do

Authentication for a WM-ADSummit WM20 User Guide, Software Release 4.2 119To define MAC-based authentication for a WM-AD:1 From the main menu, click W

About this GuideSummit WM20 User Guide, Software Release 4.212Installing Power Supply UnitsWARNING!Ensure that the following requirements are satisfie

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.212011 In the NAS Identifier box, type the Network Access Server (NA

Defining RADIUS Filter Policy for WM-ADs and WM-AD GroupsSummit WM20 User Guide, Software Release 4.2 1215 From the RADIUS drop-down list, select the

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.21223 Click the RAD Policy tab.4 In the Filter ID Values box, type t

Configuring Filtering Rules for a WM-ADSummit WM20 User Guide, Software Release 4.2 123Filtering Rules for an Exception FilterThe exception filter pro

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.21245 For each filtering rule you are defining, do the following:● I

Configuring Filtering Rules for a WM-ADSummit WM20 User Guide, Software Release 4.2 125rule is to deny all. Administrators should define a rule set th

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.21264 From the Filter ID drop-down list, select Non-Authenticated.Th

Configuring Filtering Rules for a WM-ADSummit WM20 User Guide, Software Release 4.2 127NOTEAdministrators must ensure that the non-authenticated filte

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2128Once a wireless device user has logged in on the Captive Portal

Configuring Filtering Rules for a WM-ADSummit WM20 User Guide, Software Release 4.2 1294 From the Filter ID drop-down list, select one of the names yo

Safety InformationSummit WM20 User Guide, Software Release 4.2 13Maintenance SafetyTake the following precautions:● Use only original accessories and/

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2130Filtering Rules by Filter ID ExamplesBelow are two examples of p

Configuring Filtering Rules for a WM-ADSummit WM20 User Guide, Software Release 4.2 1314 From the Filter ID drop-down list, select Default. The Filter

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2132Filtering Rules for an AAA Child Group WM-ADIf you defined a chi

Enabling Multicast for a WM-ADSummit WM20 User Guide, Software Release 4.2 133To enable multicast for a WM-AD:1 From the main menu, click WM-AD Config

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2134Configuring Privacy for a WM-ADPrivacy is a mechanism that prote

Configuring Privacy for a WM-ADSummit WM20 User Guide, Software Release 4.2 1354 Select Static Keys (WEP).5 From the WEP Key Length drop-down list, se

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.21366 If WPA v.1 is enabled, select one of the following encryption

Configuring Privacy for a WM-ADSummit WM20 User Guide, Software Release 4.2 137Privacy for a WM-AD for AAAFor a WM-AD with authentication by 802.1x (A

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2138● 152-bit6 Select one of the following input methods: ● Input He

Configuring Privacy for a WM-ADSummit WM20 User Guide, Software Release 4.2 139The encryption portion of WPA v2 is Advanced Encryption Standard (AES).

About this GuideSummit WM20 User Guide, Software Release 4.214Canada only. Power supply cords for use outside of United States and Canada are typicall

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.21404 Select WPA.5 To enable WPA v1 encryption, select WPA v.1.6 Fro

Defining Priority Level and Service Class for WM-AD TrafficSummit WM20 User Guide, Software Release 4.2 141To define a WM-AD with no authentication:1

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2142Defining the Service Class for the WM-ADService class is determi

Working with Quality of Service (QoS)Summit WM20 User Guide, Software Release 4.2 143Working with Quality of Service (QoS)QoS policy is configured for

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2144The APs are capable of supporting 5 queues. The queues are imple

Configuring the QoS Policy on a WM-ADSummit WM20 User Guide, Software Release 4.2 145Configuring the QoS Policy on a WM-ADThe following is an overview

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2146Step 4 – Enable Priority override:● Select the applicable servic

Configuring the QoS Policy on a WM-ADSummit WM20 User Guide, Software Release 4.2 1473 Click the QoS Policy tab.4 From the Wireless QoS list, select t

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2148 Bronze (2) Best Effort (1) Background (0) – The lowest prior

Bridging Traffic LocallySummit WM20 User Guide, Software Release 4.2 149● UntaggedIf you select Ta gg ed , type the VLAN ID in the VLAN ID box. NOTETh

Safety InformationSummit WM20 User Guide, Software Release 4.2 15Battery Replacement and DisposalPlease note the following for batteries:● Replacing l

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.2150

Summit WM20 User Guide, Software Release 4.2 1516 Availability and Controller FunctionalityThis chapter describes the availability concepts, including

Availability and Controller FunctionalitySummit WM20 User Guide, Software Release 4.2152For more information, see “Configuring the Default AP Settings

Availability OverviewSummit WM20 User Guide, Software Release 4.2 153● If the APs are not yet known to the system, the AP will be initially configured

Availability and Controller FunctionalitySummit WM20 User Guide, Software Release 4.2154● For a primary controller, in the Summit Switch IP Address bo

Availability OverviewSummit WM20 User Guide, Software Release 4.2 155Viewing SLP ActivityIn normal operations, the primary Summit WM Controller regist

Availability and Controller FunctionalitySummit WM20 User Guide, Software Release 4.2156Events and Actions During a FailoverIf one of the Summit WM Co

Defining Management UsersSummit WM20 User Guide, Software Release 4.2 157When the failed Summit WM Controller recovers, each Summit WM Controller in t

Availability and Controller FunctionalitySummit WM20 User Guide, Software Release 4.2158The user_admin list displays Admin users who have read/write p

Configuring Network TimeSummit WM20 User Guide, Software Release 4.2 159To apply time zone settings:1 From the main menu, click Summit Switch. The Sum

About this GuideSummit WM20 User Guide, Software Release 4.216SicherheitshinweiseVor der Installation der Produkte von Extreme Networks sind die nachf

Availability and Controller FunctionalitySummit WM20 User Guide, Software Release 4.21603 To use Network Time Protocol, select the Use NTP radio butto

Configuring Check Point Event LoggingSummit WM20 User Guide, Software Release 4.2 161To enable and configure Check Point:1 From the main menu, click S

Availability and Controller FunctionalitySummit WM20 User Guide, Software Release 4.2162If there is an error in generating the certificate or establis

Enabling SNMPSummit WM20 User Guide, Software Release 4.2 163● EXTREME-SUMMIT-WM-SMI ● EXTREME-SUMMIT-WM-DOT11-EXTNS-MIB● EXTREME-SUMMIT-WM-BRANCH-OFF

Availability and Controller FunctionalitySummit WM20 User Guide, Software Release 4.21643 Type: the following information:● Contact Name – Specifies t

Using Controller UtilitiesSummit WM20 User Guide, Software Release 4.2 1653 In the Target IP Address box, type the IP address of the destination compu

Availability and Controller FunctionalitySummit WM20 User Guide, Software Release 4.21665 To record the route through the Internet between your comput

Configuring Web Session TimeoutsSummit WM20 User Guide, Software Release 4.2 167To configure Web session timeouts:1 From the main menu, click Summit S

Availability and Controller FunctionalitySummit WM20 User Guide, Software Release 4.2168

Summit WM20 User Guide, Software Release 4.2 1697 Working With Third-Party APsYou can set up the Summit WM Controller to handle wireless device traffi

SicherheitshinweiseSummit WM20 User Guide, Software Release 4.2 17Installation von NetzteilenBei der Installation sämtlicher Netzteile von Extreme Net

Working With Third-Party APsSummit WM20 User Guide, Software Release 4.2170Step 2 – Define a WM-AD for the third-party AP port:1 From the main menu, c

Summit WM20 User Guide, Software Release 4.2 171Step 4 – Define filtering rules for the third-party APs:1 Because the third-party APs are mapped to a

Working With Third-Party APsSummit WM20 User Guide, Software Release 4.2172

Summit WM20 User Guide, Software Release 4.2 1738 Working With the Summit WM Series SpyThis chapter describes Summit WM series Spy concepts, including

Working With the Summit WM Series SpySummit WM20 User Guide, Software Release 4.2174Enabling the Analysis and Data Collector EnginesBefore using the S

Running Summit WM Series Spy ScansSummit WM20 User Guide, Software Release 4.2 175Running Summit WM Series Spy ScansThe Summit WM series Spy feature a

Working With the Summit WM Series SpySummit WM20 User Guide, Software Release 4.2176NOTEA Wireless AP can participate in only one Scan Group at a time

Working With Summit WM Series Spy Scan ResultsSummit WM20 User Guide, Software Release 4.2 177● Wireless devices – Registered with any Summit WM Contr

Working With the Summit WM Series SpySummit WM20 User Guide, Software Release 4.21785 To view the Rogue Summary report, click Rogue Summary. The Rogue

Working With Friendly APsSummit WM20 User Guide, Software Release 4.2 179To add an AP from the Summit WM series Spy scan results to the list of friend

About this GuideSummit WM20 User Guide, Software Release 4.218● Beim Umgang mit Modulen, optischen Geräten, Netzteilen oder anderen modularen Zubehört

Working With the Summit WM Series SpySummit WM20 User Guide, Software Release 4.2180To add friendly APs manually:1 From the main menu, click Summit Sp

Maintaining the Summit WM Series Spy List of APsSummit WM20 User Guide, Software Release 4.2 181Maintaining the Summit WM Series Spy List of APsTo mai

Working With the Summit WM Series SpySummit WM20 User Guide, Software Release 4.21824 To delete the selected APs, click Delete marked WAPs.NOTEThe sel

Viewing the Scanner Status ReportSummit WM20 User Guide, Software Release 4.2 183The boxes display the IP address of the Data Collector engine. The st

Working With the Summit WM Series SpySummit WM20 User Guide, Software Release 4.2184

Summit WM20 User Guide, Software Release 4.2 1859 Working With Reports and DisplaysThis chapter describes the various reports and displays available i

Working With Reports and DisplaysSummit WM20 User Guide, Software Release 4.2186To view reports and displays:1 From the main menu, click Reports &

Viewing the DisplaysSummit WM20 User Guide, Software Release 4.2 187In normal operations, when the Summit WM Controller Availability feature is enable

Working With Reports and DisplaysSummit WM20 User Guide, Software Release 4.2188To view Wireless Statistics by Altitude AP:1 From the main menu, click

Viewing the DisplaysSummit WM20 User Guide, Software Release 4.2 189To view Active Clients by Altitude AP statistics:1 From the main menu, click Repor

SicherheitshinweiseSummit WM20 User Guide, Software Release 4.2 19● Nr. 18 AWG (0,823 mm2) für Einheiten mit einem Bemessungsstrom von weniger als 10

Working With Reports and DisplaysSummit WM20 User Guide, Software Release 4.2190To view manufacturing information:1 From the main menu, click Reports

Viewing ReportsSummit WM20 User Guide, Software Release 4.2 191To view reports:1 From the main menu, click Reports & Displays. The Reports & D

Working With Reports and DisplaysSummit WM20 User Guide, Software Release 4.2192The following is an example of the AP Inventory report:The following i

Viewing ReportsSummit WM20 User Guide, Software Release 4.2 193● HW – Hardware version of the Wireless AP.● SW – Software version executing on theWire

Working With Reports and DisplaysSummit WM20 User Guide, Software Release 4.2194

Summit WM20 User Guide, Software Release 4.2 19510 Performing System MaintenanceThis chapter describes system maintenance processes, including:● “Perf

Performing System MaintenanceSummit WM20 User Guide, Software Release 4.2196To disassociate a wireless device client:1 From the main menu, click Altit

Performing Wireless AP Client ManagementSummit WM20 User Guide, Software Release 4.2 1973 In the Select WAP list, click the AP you want to disassociat

Performing System MaintenanceSummit WM20 User Guide, Software Release 4.21983 Click the Blacklist tab.4 To add a new MAC address to the blacklist, in

Resetting the AP to Its Factory Default SettingsSummit WM20 User Guide, Software Release 4.2 199To import a list of MAC addresses for the blacklist:1

Summit WM20 User Guide, Software Release 4.22AccessAdapt, Alpine, BlackDiamond, EPICenter, ESRP, Ethernet Everywhere, Extreme Enabled, Extreme Etherne

About this GuideSummit WM20 User Guide, Software Release 4.220

Performing System MaintenanceSummit WM20 User Guide, Software Release 4.2200Performing System Maintenance TasksYou can perform various maintenance tas

Performing System Maintenance TasksSummit WM20 User Guide, Software Release 4.2 201example, if you select Minor, you receive all Minor, Major and Crit

Performing System MaintenanceSummit WM20 User Guide, Software Release 4.2202Table 18 displays Syslog and Summit WM Controller, Access Points and Softw

Performing Summit WM Controller Software MaintenanceSummit WM20 User Guide, Software Release 4.2 203To upgrade Summit WM Controller software:1 From th

Performing System MaintenanceSummit WM20 User Guide, Software Release 4.2204● FTP Server – The IP of the FTP server to retrieve the image file from.●

Performing Summit WM Controller Software MaintenanceSummit WM20 User Guide, Software Release 4.2 2053 Click the OS Software tab.The Available OS Image

Performing System MaintenanceSummit WM20 User Guide, Software Release 4.22065 Click Download. The image is downloaded and added to the list.To delete

Performing Summit WM Controller Software MaintenanceSummit WM20 User Guide, Software Release 4.2 2075 To launch the backup with the selected items, cl

Performing System MaintenanceSummit WM20 User Guide, Software Release 4.22085 In the What to backup drop-down list, select what you want to backup:● C

Performing Summit WM Controller Software MaintenanceSummit WM20 User Guide, Software Release 4.2 209The Available Backups section displays the list it

Summit WM20 User Guide, Software Release 4.2 211 Overview of the Summit WM Controller, Access Points and Software SolutionThis chapter describes Summi

Performing System MaintenanceSummit WM20 User Guide, Software Release 4.2210To delete a backup available for restore:1 From the main menu, click Summi

Performing Summit WM Controller Software MaintenanceSummit WM20 User Guide, Software Release 4.2 2114 To complete a Summit WM Controller upgrade or an

Performing System MaintenanceSummit WM20 User Guide, Software Release 4.2212Examples of events on the Summit WM Controller that generate an alarm mess

Performing Summit WM Controller Software MaintenanceSummit WM20 User Guide, Software Release 4.2 2135 To refresh the information in any display, click

Performing System MaintenanceSummit WM20 User Guide, Software Release 4.2214To view audits:1 From the main menu, click Logs & Traces. The Logs &am

Performing Summit WM Controller Software MaintenanceSummit WM20 User Guide, Software Release 4.2 215To clear logs:1 From the main menu, click Logs &am

Performing System MaintenanceSummit WM20 User Guide, Software Release 4.2216

Summit WM20 User Guide, Software Release 4.2 217GlossaryNetworking Terms and AbbreviationsAAAA Authentication, Authorization and Accounting. A system

GlossarySummit WM20 User Guide, Software Release 4.2218BBSS Basic Service Set. A wireless topology consisting of one Access Point connected to a wired

DSummit WM20 User Guide, Software Release 4.2 219Device Server A specialized, network-based hardware device designed to perform a single or specialize

Overview of the Summit WM Controller, Access Points and Software SolutionSummit WM20 User Guide, Software Release 4.222Figure 1: Standard Wireless Net

GlossarySummit WM20 User Guide, Software Release 4.2220DTIM DTIM delivery traffic indication message (in 802.11 standard)Dynamic WEP The IEEE introduc

FSummit WM20 User Guide, Software Release 4.2 221FFHSS Frequency-Hopping Spread Spectrum. A transmission technology used in Local Area Wireless Networ

GlossarySummit WM20 User Guide, Software Release 4.2222HHeartbeat message A heartbeat message is a UDP data packet used to monitor a data connection,

ISummit WM20 User Guide, Software Release 4.2 223Infrastructure Mode An 802.11 networking framework in which devices communicate with each other by fi

GlossarySummit WM20 User Guide, Software Release 4.2224isochronous Isochronous data is data (such as voice or video) that requires a constant transmis

NSummit WM20 User Guide, Software Release 4.2 225MIC Message Integrity Check or Code (MIC), also called "Michael", is part of WPA and TKIP.

GlossarySummit WM20 User Guide, Software Release 4.2226NTP Network Time Protocol, an Internet standard protocol (built on top of TCP/IP) that assures

PSummit WM20 User Guide, Software Release 4.2 227OSPF Open Shortest Path First, an interior gateway routing protocol developed for IP networks based o

GlossarySummit WM20 User Guide, Software Release 4.2228PoE Power over Ethernet. The Power over Ethernet standard (802.3af) defines how power can be p

SSummit WM20 User Guide, Software Release 4.2 229RFC Request for Comments, a series of notes about the Internet, submitted to the Internet Engineering

Elements of the Summit WM Controller, Access Points and Software SolutionSummit WM20 User Guide, Software Release 4.2 23Figure 2: Extreme Networks Sol

GlossarySummit WM20 User Guide, Software Release 4.2230SMT (802.11) Station ManagemenT. The object class in the 802.11 MIB that provides the necessary

SSummit WM20 User Guide, Software Release 4.2 231SSL Secure Sockets Layer. A protocol developed by Netscape for transmitting private documents via the

GlossarySummit WM20 User Guide, Software Release 4.2232TTCP / IP Transmission Control Protocol. TCP, together with IP (Internet Protocol), is the basi

USummit WM20 User Guide, Software Release 4.2 233UUDP User Datagram Protocol. A connectionless protocol that, like TCP, runs on top of IP networks. Un

GlossarySummit WM20 User Guide, Software Release 4.2234VSA Vendor Specific Attribute, an attribute for a RADIUS server defined by the manufacturer.(co

WSummit WM20 User Guide, Software Release 4.2 235Summit WM Controller, Access Points and Software Terms and AbbreviationsWPA Wireless Protected Access

GlossarySummit WM20 User Guide, Software Release 4.2236Data Collector The Data Collector is an application on the Summit WM Controller that receives a

Summit WM20 User Guide, Software Release 4.2 237A Summit WM20 ControllerThis chapter describes the hardware specifications for the Summit WM20 Control

Summit WM20 ControllerSummit WM20 User Guide, Software Release 4.2238Summit WM20 Controller PanelsFigure 5: Summit WM20 Controller Panels Console Port

Summit WM20 Controller LED IndicatorsSummit WM20 User Guide, Software Release 4.2 239To install the driver and use the port:1 Install the virtual seri

Overview of the Summit WM Controller, Access Points and Software SolutionSummit WM20 User Guide, Software Release 4.224● Integrates with existing netw

Summit WM20 ControllerSummit WM20 User Guide, Software Release 4.2240● STATUS LED – Indicates the normal state of the Summit WM Controller as seen by

Summit WM20 User Guide, Software Release 4.2 241B Regulatory InformationThis section provides the regulatory information for the Summit WM20 series sw

Regulatory InformationSummit WM20 User Guide, Software Release 4.2242● AS/NZX 3260 (Australia /New Zealand)EMI/EMC StandardsNorth America EMC for ITE:

Summit WM20Summit WM20 User Guide, Software Release 4.2 243● EN 300 019-2-1 v2.1.2 (2000-09), Storage, Class 1.2● EN/ETSI 300 753 (1997-10), Acoustic

Regulatory InformationSummit WM20 User Guide, Software Release 4.2244● Operating Relative Humidity110 - 90% RH ● Operating Altitude 0 – 3000 meters (9

Altitude 350-2 Int. AP (15958) AP, Altitude 350-2 Detach. AP (15939)Summit WM20 User Guide, Software Release 4.2 245interference will not occur. If th

Regulatory InformationSummit WM20 User Guide, Software Release 4.2246Conditions Under Which a Second Party May Replace a Part 15 Unlicensed AntennaSec

Altitude 350-2 Int. AP (15958) AP, Altitude 350-2 Detach. AP (15939)Summit WM20 User Guide, Software Release 4.2 247This equipment meets the following

Regulatory InformationSummit WM20 User Guide, Software Release 4.2248Declaration of Conformity with regard to R&TTE Directive of the European Unio

Altitude 350-2 Int. AP (15958) AP, Altitude 350-2 Detach. AP (15939)Summit WM20 User Guide, Software Release 4.2 249WARNING!The user or installer is r

Summit WM Controller, Access Points and Software and Your NetworkSummit WM20 User Guide, Software Release 4.2 25● DHCP Server (Dynamic Host Configurat

Regulatory InformationSummit WM20 User Guide, Software Release 4.2250● In Italy, the end user must apply for a license from the national spectrum auth

Altitude 350-2 Int. AP (15958) AP, Altitude 350-2 Detach. AP (15939)Summit WM20 User Guide, Software Release 4.2 251Portugal Indoor Only Indoor Only I

Regulatory InformationSummit WM20 User Guide, Software Release 4.2252Declarations of ConformityTable 26 presents the Extreme Networks declarations of

Certifications of Other CountriesSummit WM20 User Guide, Software Release 4.2 253Certifications of Other CountriesThe Altitude 350-2 Int. AP (15958) a

Regulatory InformationSummit WM20 User Guide, Software Release 4.2254Optional Approved 3rd Party External AntennasThe Altitude 350-2 Detach. AP (15939

Altitude 350-2 Int. AP (15958) and Altitude 350-2 Detach. (15939) Access PointsSummit WM20 User Guide, Software Release 4.2 255NOTEThe qualification t

Regulatory InformationSummit WM20 User Guide, Software Release 4.2256Table 29: FCC Antenna Channel-Power InformationAntennaAntenna #1 Cushcraft SR2405

Altitude 350-2 Int. AP (15958) and Altitude 350-2 Detach. (15939) Access PointsSummit WM20 User Guide, Software Release 4.2 257CAUTIONChannels designa

Regulatory InformationSummit WM20 User Guide, Software Release 4.2258RF Safety DistanceThe antennas used for this transmitter must be installed to pro

Altitude 350-2 Int. AP (15958) and Altitude 350-2 Detach. (15939) Access PointsSummit WM20 User Guide, Software Release 4.2 259NOTEThe qualification t

Overview of the Summit WM Controller, Access Points and Software SolutionSummit WM20 User Guide, Software Release 4.226Figure 3: Traffic Flow DiagramE

Regulatory InformationSummit WM20 User Guide, Software Release 4.2260Table 32: IC Antenna Channel-Power InformationAntennaAntenna #1 Cushcraft SR24051

Altitude 350-2 Int. AP (15958) and Altitude 350-2 Detach. (15939) Access PointsSummit WM20 User Guide, Software Release 4.2 261CAUTIONChannels designa

Regulatory InformationSummit WM20 User Guide, Software Release 4.2262RF Safety DistanceThe antennas used for this transmitter must be installed to pro

Altitude 350-2 Int. AP (15958) and Altitude 350-2 Detach. (15939) Access PointsSummit WM20 User Guide, Software Release 4.2 263NOTEIf one of the follo

Regulatory InformationSummit WM20 User Guide, Software Release 4.2264Table 35: ETSI Antenna Channel-Power InformationAntennaAntenna #1 Huber+Suhner SO

Altitude 350-2 Int. AP (15958) and Altitude 350-2 Detach. (15939) Access PointsSummit WM20 User Guide, Software Release 4.2 265CAUTIONChannels designa

Regulatory InformationSummit WM20 User Guide, Software Release 4.2266RF Safety DistanceThe antennas used for this transmitter must be installed to pro

Summit WM20 User Guide, Software Release 4.2 267IndexAaccountingsetup on a WM-AD, 120addingWireless AP manually, 63alarmsoverview of log types and lev

IndexSummit WM20 User Guide, Software Release 4.2268failover of a RADIUS server, 112filteringdefault filter, 130exception filter on a WM-AD, 123filter

IndexSummit WM20 User Guide, Software Release 4.2 269Rradio5 GHz (a) and 2.4 GHz (b/g), 56channels, 71, 75radio settingsview and modify, 70RADIUS serv

Summit WM Controller, Access Points and Software and Your NetworkSummit WM20 User Guide, Software Release 4.2 27The Summit WM Controller, Access Point

IndexSummit WM20 User Guide, Software Release 4.2270153, 156copy to defaults, 79international licensing, 56LED sequence in discovery, 58maintenance an

Overview of the Summit WM Controller, Access Points and Software SolutionSummit WM20 User Guide, Software Release 4.228WM Access Domain ServicesWM Acc

Summit WM Controller, Access Points and Software and Your NetworkSummit WM20 User Guide, Software Release 4.2 29Packet Filtering PolicyPolicy refers t

Summit WM20 User Guide, Software Release 4.2 3Table of ContentsAbout this Guide...

Overview of the Summit WM Controller, Access Points and Software SolutionSummit WM20 User Guide, Software Release 4.230If a Summit WM Controller fails

System Configuration OverviewSummit WM20 User Guide, Software Release 4.2 31have the same configuration, this feature will expedite deployment, as an

Overview of the Summit WM Controller, Access Points and Software SolutionSummit WM20 User Guide, Software Release 4.232

Summit WM20 User Guide, Software Release 4.2 332 Configuring the Summit WM ControllerThis chapter introduces the Summit WM Controller and describes th

Configuring the Summit WM ControllerSummit WM20 User Guide, Software Release 4.234Summit WM Controller Product FamilyThe Summit WM Controller is avail

System Configuration OverviewSummit WM20 User Guide, Software Release 4.2 35Step 2 – Preparing the networkEnsure relevant DHCP servers and RADIUS serv

Configuring the Summit WM ControllerSummit WM20 User Guide, Software Release 4.236Configuring for Remote AccessIn addition, the first-time setup also

Performing the First-Time Setup of the Summit WM ControllerSummit WM20 User Guide, Software Release 4.2 37For more information, see Chapter 3, “Config

Configuring the Summit WM ControllerSummit WM20 User Guide, Software Release 4.2384 In the User Name box, type your user name. The default is admin.5

Performing the First-Time Setup of the Summit WM ControllerSummit WM20 User Guide, Software Release 4.2 39NOTEAll images of the Summit WM GUI in this

Table of ContentsSummit WM20 User Guide, Software Release 4.24Filtering at the Interface Level...

Configuring the Summit WM ControllerSummit WM20 User Guide, Software Release 4.24010 Type the following information:● Hostname – Specifies the name of

Performing the First-Time Setup of the Summit WM ControllerSummit WM20 User Guide, Software Release 4.2 41To change the administrator password:1 From

Configuring the Summit WM ControllerSummit WM20 User Guide, Software Release 4.2424 In the Apply Product Key section, click Browse to navigate to the

Performing the First-Time Setup of the Summit WM ControllerSummit WM20 User Guide, Software Release 4.2 43● Third-Party AP PortUse a third-party AP po

Configuring the Summit WM ControllerSummit WM20 User Guide, Software Release 4.244The chart below summarizes the port types and their functions:To con

Performing the First-Time Setup of the Summit WM ControllerSummit WM20 User Guide, Software Release 4.2 453 To select a port, click it.Port configurat

Configuring the Summit WM ControllerSummit WM20 User Guide, Software Release 4.246To set a static route on the Summit WM Controller:1 From the main me

Performing the First-Time Setup of the Summit WM ControllerSummit WM20 User Guide, Software Release 4.2 47To view the forwarding table on the Summit W

Configuring the Summit WM ControllerSummit WM20 User Guide, Software Release 4.248To set OSPF Routing Global Settings on the Summit WM Controller:1 Fr

Performing the First-Time Setup of the Summit WM ControllerSummit WM20 User Guide, Software Release 4.2 49To set OSPF Routing Port Settings on the Sum

Table of ContentsSummit WM20 User Guide, Software Release 4.2 5Assigning Wireless AP Radios to a WM-AD...

Configuring the Summit WM ControllerSummit WM20 User Guide, Software Release 4.250Filtering at the Interface LevelThe Summit WM Controller, Access Poi

Performing the First-Time Setup of the Summit WM ControllerSummit WM20 User Guide, Software Release 4.2 51To enable SSH, HTTPS, or SNMP access through

Configuring the Summit WM ControllerSummit WM20 User Guide, Software Release 4.252To define port exception filters:1 From the main menu, click Summit

Ongoing Operations of the Summit WM Controller, Access Points and SoftwareSummit WM20 User Guide, Software Release 4.2 53● Registering and assigning A

Configuring the Summit WM ControllerSummit WM20 User Guide, Software Release 4.254

Summit WM20 User Guide, Software Release 4.2 553 Configuring the Wireless APThis chapter discusses the Wireless AP and its role in the Summit WM Contr

Configuring the Wireless APSummit WM20 User Guide, Software Release 4.256NOTEIn order to comply with FCC regulations in North America, the U-NII Low B

Discovery and Registration OverviewSummit WM20 User Guide, Software Release 4.2 57Wireless AP DiscoveryWireless APs discover the IP address of a Summi

Configuring the Wireless APSummit WM20 User Guide, Software Release 4.258● Step 5 – Use a multicast SLP request to find SLP SAsIf all of the preceding

Discovery and Registration OverviewSummit WM20 User Guide, Software Release 4.2 59WARNING!Never disconnect a Wireless AP from its power supply during

Table of ContentsSummit WM20 User Guide, Software Release 4.26Analysis Engine Overview ...

Configuring the Wireless APSummit WM20 User Guide, Software Release 4.260Configuring the Wireless APs for the First TimeBefore the Wireless AP is conf

Configuring the Wireless APs for the First TimeSummit WM20 User Guide, Software Release 4.2 61● If the Summit WM Controller does not recognize the reg

Configuring the Wireless APSummit WM20 User Guide, Software Release 4.262To define the discovery process parameters: 1 From the main menu, click Altit

Adding and Registering a Wireless AP ManuallySummit WM20 User Guide, Software Release 4.2 63Connecting the Wireless AP to a Power Source and Initiatin

Configuring the Wireless APSummit WM20 User Guide, Software Release 4.2648 Click Add Altitude AP. The Wireless AP is added and registered.When a Wirel

Modifying Wireless AP SettingsSummit WM20 User Guide, Software Release 4.2 652 In the left pane, click Access Approval. The Access Approval screen is

Configuring the Wireless APSummit WM20 User Guide, Software Release 4.266To configure the default AP settings:1 From the main menu, click Altitude APs

Modifying Wireless AP SettingsSummit WM20 User Guide, Software Release 4.2 67● Max TX Power Level – For each radio, select the appropriate Tx power le

Configuring the Wireless APSummit WM20 User Guide, Software Release 4.268mode. If necessary, the Max Operational Rate choices adjust automatically to

Modifying Wireless AP SettingsSummit WM20 User Guide, Software Release 4.2 69To modify a Wireless AP’s properties as an access point:1 From the main m

Table of ContentsSummit WM20 User Guide, Software Release 4.2 7United States - FCC Declaration of Conformity Statement ...

Configuring the Wireless APSummit WM20 User Guide, Software Release 4.270● Name – Type a unique name for the Wireless AP that identifies the AP. The d

Modifying Wireless AP SettingsSummit WM20 User Guide, Software Release 4.2 71● Changing the radio channel between Auto and any fixed channel numberIf

Configuring the Wireless APSummit WM20 User Guide, Software Release 4.272large number. For example, 5. Use a small number for broadcast and multicast

Modifying Wireless AP SettingsSummit WM20 User Guide, Software Release 4.2 7336, 28, or 54 Mbps for 11b+11g or 11g-only modes. If necessary, the Max O

Configuring the Wireless APSummit WM20 User Guide, Software Release 4.274● If applicable, click the 802.11a tab to modify the radio properties.● DTIM

Modifying Wireless AP SettingsSummit WM20 User Guide, Software Release 4.2 75milliwatt). If Dynamic Radio Management (DRM) was enabled on the DRM scre

Configuring the Wireless APSummit WM20 User Guide, Software Release 4.276NOTEIf a Wireless AP with a statically configured IP address (without a stati

Configuring Dynamic Radio ManagementSummit WM20 User Guide, Software Release 4.2 77this situation, you will need to reset the AP to its factory defaul

Configuring the Wireless APSummit WM20 User Guide, Software Release 4.278● Avoids other WLANs by reducing transmit power whenever other APs with the s

Modifying a Wireless AP’s Properties Based on a Default AP ConfigurationSummit WM20 User Guide, Software Release 4.2 799 From the Minimum drop-down li

Table of ContentsSummit WM20 User Guide, Software Release 4.28

Configuring the Wireless APSummit WM20 User Guide, Software Release 4.2803 If applicable, modify the Wireless AP’s properties. For more information, s

Performing Wireless AP Software MaintenanceSummit WM20 User Guide, Software Release 4.2 81The Wireless APs shown in the Altitude AP list can be from a

Configuring the Wireless APSummit WM20 User Guide, Software Release 4.2823 From the WAP Images for Platform drop-down list select the appropriate plat

Performing Wireless AP Software MaintenanceSummit WM20 User Guide, Software Release 4.2 833 From the WAP Images for Platform drop-down list, select th

Configuring the Wireless APSummit WM20 User Guide, Software Release 4.2843 Click the Controlled Upgrade tab.NOTEThe Controlled Upgrade tab will appear

Summit WM20 User Guide, Software Release 4.2 854 WM Access Domain ServicesThis chapter describes WM Access Domain Services (WM-AD) concepts, including

WM Access Domain ServicesSummit WM20 User Guide, Software Release 4.286● Each WM-AD also offers unique Authentication, Authorization and Accounting (A

Topology of a WM-ADSummit WM20 User Guide, Software Release 4.2 87User Access PlanThe user access plan should analyze the enterprise network and ident

WM Access Domain ServicesSummit WM20 User Guide, Software Release 4.288● Used for a WM-AD supporting third-party APs● Has WEP and WPA-PSK privacy● AAA

Authentication for a WM-ADSummit WM20 User Guide, Software Release 4.2 89Authentication for a WM-ADThe third step in setting up a WM-AD is to configur

Summit WM20 User Guide, Software Release 4.2 9About this GuideThis guide describes how to install, configure, and manage the Summit® WM Controller, Ac

WM Access Domain ServicesSummit WM20 User Guide, Software Release 4.290● Extensible Authentication Protocol with Tunneled Transport Layer Security (EA

Filtering for a WM-ADSummit WM20 User Guide, Software Release 4.2 91Within each type of filter, define a sequence of filtering rules. The filtering ru

WM Access Domain ServicesSummit WM20 User Guide, Software Release 4.292The following is a high-level description of how Summit WM Controller filters t

WM-AD Global SettingsSummit WM20 User Guide, Software Release 4.2 93To define RADIUS servers for WM-AD global settings: 1 From the main menu, click WM

WM Access Domain ServicesSummit WM20 User Guide, Software Release 4.2944 Using the percentage drop-down lists, define the thresholds for the following

Setting up a New WM-ADSummit WM20 User Guide, Software Release 4.2 95Setting up a New WM-ADNow that you are familiar with the WM-AD concepts, you can

WM Access Domain ServicesSummit WM20 User Guide, Software Release 4.296

Summit WM20 User Guide, Software Release 4.2 975 WM Access Domain Services ConfigurationThis chapter discusses WM Access Domain Services (WM-AD) confi

WM Access Domain Services ConfigurationSummit WM20 User Guide, Software Release 4.298To create a new WM-AD name:1 From the main menu, click WM-AD Conf

Topology for a WM-ADSummit WM20 User Guide, Software Release 4.2 99Configuring Topology for a WM-AD for Captive PortalThe section describes how to set