Extreme Networks ExtremeWare XOS Command Especificações descarregar pdf (Página 426)

100

101

426 ExtremeWare XOS 10.1 Command Reference Guide

IP Unicast Commands

configure bootprelay add

configure bootprelay add <ip_address> {vrid <vrid>}

Description

Configures the addresses to which BOOTP requests should be directed.

Syntax Description

Default

The default vrid is vr-2.

Usage Guidelines

After IP unicast routing has been configured, you can configure the switch to forward Dynamic Host

Configuration Protocol (DHCP) or BOOTP requests coming from clients on subnets being serviced by

the switch and going to hosts on different subnets. To configure the relay function, follow these steps:

1 Configure VLANs and IP unicast routing.

2 Configure the addresses to which DHCP or BOOTP requests should be directed, using the following

command:

configure bootprelay add <ip_address>

3 Enable the DHCP or BOOTP relay function, using the following command:

enable bootprelay

Example

The following command configures BOOTP requests to be directed to 123.45.67.8:

configure bootprelay add 123.45.67.8

ip_address Specifies an IP address.

vrid Specifies a VR name.

1 2 ... 421 422 423 424 425 426 427 428 429 430 431 ... 757 758

Comentários a estes Manuais

Sem comentários

Extreme Networks ExtremeWare XOS Command Especificações Página 426

Comentários a estes Manuais